Gypsum Based Projection Plaster

APPLICATION FIELD

Applied on brick,

Concrete,

Autoclaved

Aerated concrete,

Fair faced concrete,

Bims, briquette, walls

and ceilings in the interior faces of buildings.

APPLICATION

SURFACE PREPARATION  

The surface must be cleaned from form oil, dust, paint and adherence reducing materials.

All the holes should be filled and repairs must be made with appropriate Entegre product before plastering.

Application surface must be dampened with water before application if required.

PREPARATION of the MORTAR  

Application thickness should be between 8 mm and 25 mm in the first coat.

If the thickness is more than 25 mm, second coat is applied in max. 25 mm thickness.

Surface is levelled. Approximately one hour later after the latest application, it is leveled again.

When surface becomes hard that it can not be levelled, it is smoothed by steel spatula.

ALIMATK PLUS surface is dampened and trifled to have a satin surface.

According to weather conditions, after 10-15 min, by applying steel trowel, perfect surface is obtained.

After 2 hours when the surface becomes tough, it is dampened and finished by steel trowel.

CONSUMPTION

For 1 cm plaster thickness, the consumption is approximately 8,0 kg/m